Automatic Egg Turning
The built in turner gently rotates all 72 eggs at your chosen interval, mimicking a broody hen and preventing embryos sticking to the shell, so every egg develops evenly without you touching a thing.
Flat rate Delivery
Secure Transactions
You're $120.00 away from your first free gift!

The built in turner gently rotates all 72 eggs at your chosen interval, mimicking a broody hen and preventing embryos sticking to the shell, so every egg develops evenly without you touching a thing.
An included peristaltic pump draws water from a container beside the unit and feeds it to an evaporation block, holding your set humidity automatically instead of you topping up trays every day.
The individually calibrated temperature sensor holds your set point precisely, and built in high and low temperature alarms warn you the moment conditions drift, protecting the hatch around the clock.
The full transparent top lets you check eggs and watch chicks pip without lifting the lid, keeping heat and humidity stable and the hatch stress free for developing embryos.
our settings are saved automatically, so after a blackout the incubator picks up where it left off and flags the interruption on screen, prompting you to candle and check the eggs.
Drawing around 60W in typical operation, it incubates 72 eggs for roughly the power of a light globe, keeping running costs low across a full 21 day hatch cycle.
|
|
Best Choice Nesty Digital 72 Egg Incubator | Other Incubators |
|---|---|---|
| Alarms | High and low temperature built in | Often none |
| Humidity | Automatic pump fed | Manual water top ups |
| Turning | Automatic, adjustable 5 to 180 min | Manual or fixed |
| Sensor | Individually calibrated | Uncalibrated readouts |
| Power Cut | Settings retained, alert shown | Settings often lost |
*Compared against basic egg incubators without automatic humidity, calibrated sensors or temperature alarms, commonly sold to Australian backyard hatchers. Always follow the manual and monitor your hatch regularly.
Most keepers are loaded and running in under 15 minutes. Here is the four-step routine.
Fit the top to the base with the turning motor seated over the link, and set the incubator on a flat, water-resistant surface. Keep it away from direct sunlight, draughts and air conditioning vents.
Place the water container beside the unit, never on top. Fit the pump tubing and fill the container with purified or distilled water so the pump can feed humidity into the chamber.
Run the incubator empty for several hours at the factory-set 37.5C so the chamber settles. Once stable, load your eggs pointed-end down.
Turning starts after day 1 to 2. Candle the eggs at the one-third mark to check development. Stop turning and fit the hatching mat 2 days before hatch day, then leave the incubator alone through hatch.

Tap a size below to switch to that product page. The price, image, and details update with your selection.